Pinellas Park, FL

Customer said unit is not cooling. After finishing diagnosing found out that condenser fan motor is dead and compressor capacitor is low. Also unit is 21 years old. Customer said that he don’t want new unit he will get some window unit.

After we clean the drain and install the iflo, we have to go back to make sure the primary pain doesn't have a leak The unit has a leak underneath, this could be due to a clogged drain. The primary pain is not visible anywhere.

The drain was cleaned with drain solve, all the water was removed from the drain pan, and an iflo was installed WE SHOULD COME BACK IN A FEW DAYS TO MAKE SURE THAT PRIMARY PAIN IS NOT BROKEN. I've been looking at it from all sides and it looks good.

Customer said it gets hot during afternoon hours and temp goes up to 76F . Checked pressures and they were good . Temp split between air handler was 21 F which is good. Ductwork is in bad shape and need to be replaced . Customer wants a quote for a new ductwork

Customer complained that unit is not keeping up temp. Checked and the unit was a little low on Freon. Checked for leak in mini split head and condenser but couldn’t catch any leak. Added 1 lb and cleaned condenser coil because it was dirty . Unit is operating as designed now.

New Drain Line and installed iFlo

Arrived onsite and spoke to homeowner and she mentioned the system came on once. I turned thermostat on and found that the indoor unit was running and outdoor unit was running as well but without the compressor. I checked the capacitor and it was working okay. Checked thermal on compressor and it was not in thermal lockout. Plugged disconnect back in and caught the unit pulling 269 amps and system is LRA 77 amps. Recommended a maintenance contract and recommended either replacing the unit or replacing the compressor. Compressor is under warranty till next year 5/17/26.

There's nothing wrong with this system. The system is 10 years old, and the client wants an estimate for a new system. He can be here tomorrow at 1:00 to meet with an advisor

Completed full maintenance on split system unit Checked all wiring and components Checked refrigerant levels and temperature, refrigerant levels were reading low. Customer has had a problem with this in the past. He was very upset so I had Chris speak with him. We told him we will need to get a leak search. Chris told him we can do a complementary leak search since he’s had so many issues in the past Please schedule me and Chris out here ASAP for a complimentary leak search CALL CUSTOMER WEDNESDAY MORNING. I added 3 Lbs of refrigerant to get them through until we can get back out there and find the leak Tested capacitor Tested fan and compressor amps Flushed and vacuumed condensate line Tested float switch Tested blower fan amps System is up and operating at this time

Cleaned Evan coil in place and checked the pressure and temperature differential. Pressure are at the level they supposed to be. Recommend to customer to add electronic air cleaner or I’ve light system to prevent this from the future

Phone maintenance on split system. System is a 22-year-old unit or 22 highly recommend replacing this unit as soon as possible.

The drainage was clogged and buried under the ground Flushed with drain solve And it was totally clean Completed full maintenance on split system Checked capacitor and contactor Checked refrigerant levels and temperature Tested float switch Took air temperature on supply and return System running and operating at this time

System needs new blower motor.

Customer complaining that condenser coil was freezing up. Performed a full system check found bottom of the evaporator coil dirty and there was no filter installed upon arrival. Hermetic side on capacitor was reading low. Installed new capacitor and scheduled an evaporator coil cleaning.

Upon arrival found unit operating checked all major components to specifications checked all wiring for breakage and or corrosion changed out the filter and flushed out the drain line installed a surge protector and cleaned and flushed out evaporator drain and drain line unit is operating correctly at this time

Checked pressures, temperatures, and amp draws. All within factory specifications. System is working and draining properly. Found blower motor set to “always on” at thermostat. This drives the humidity through the roof. Turned blower to auto so everything will turn on and off at once. Turned on the “cool to dry” mode upon customer approval. This mode uses additional cooling to reduce high indoor humidity. Also turned off “airwave” mode upon customer approval. This mode turns off the outside unit and continues running the blower motor inside by itself which we don’t want so we went ahead and turned that off. - Collin

Upon arrival found board with error code flashing 9 times stating that outdoor ambient temp is 0 degrees Fahrenheit, which is not true. Ohmed out outdoor ambient temp sensor and its reading O.L. Found cut in wire. Will need to return with outdoor ambient temp sensor. Do not need board. Will need to recalculate pricing. Manufacturer Trane Model # 4TWR5030H1000AA Serial # 180540W0BF Installed new outdoor ambient temp sensor. Checked heating and cooling. System is working properly. - Collin

EAC MEDIA FILTERS

Warranty Evaporator Coil Came to install evaporator coil and new TXB removed old coil and TXV install new coil and new TXV check drain pan for any leaks, clean condensate pump put new filter dryer on charged to manufacturer specs. System is cooling properly at this time and draining.

Upon arrival found unit not working upon further inspection found that the unit has no refrigerant so have to return to find the leak and gas up with 410 a refrigerant

Came to perform one time maintenance. Customer was not interested in signing up for the membership yet cleared drain lines made sure the float switches worked got amp draws check the capacitors one is a 40/5 µF the other one is a 45/5 µF checked pressures systems are cooling and draining properly at this time

Installation of Amana Heat Pump . All work to be performed in a neat and professional manner in accordance with existing codes by trained technicians. 100% satisfaction guaranteed.

Arrived at the home and cleaned the primary drain line and pan. Proceeded to install the IFlo. Downloaded the IFlo for monitoring but had a difficult time to download the app to the homeowners tablet. They will try after hurricane. Equipment is cooling and operating.

System is working and draining properly. Vibration noise is now gone after moving emergency pan under air handler a little bit. - Collin

Upon arrival thermostat was blank and indoor and outdoor unit wasn’t working. Checked breakers, jumped R and G at thermostat, checked power coming in, checked transformer. Disconnected primary float switch, iFlow, and Condensate pump. After troubleshooting found the pump to have failed. Most likely took a surge during the storm. We installed this pump in the Last few weeks. Temporarily installed a 120v pump using the bathroom outlet. Office we will need to come back and install a 230v pump and wire directly into the unit. Customer asked about warranty. Office please verify with storm. Used green sky application ID to add the full price of a new pump and service fee. Refrigerant levels and delta temp are good.